2024-2025 L3HSDC 3D Print Form

L3HSDC 3D Print Form

Please use this form to submit .stl files to be printed at the L3HSDC. Refresh the page if you encounter any issues. Please contact rma@fit.edu if you have any questions regarding your print.
Name*

First NameLast Name
Phone Number*

Area CodePhone Number
Email*
FIT Email (Do NOT use personal email - your request will be DENIED)
Type of Project*

A - Senior DesignB - Faculty/ResearchC - Class ProjectD - Student Organization ProjectE - Personal
Enter the name of your student org:
Description of Project*
Printer Settings*

Default - Printer, material, and print settings will be chosen by staffCustom - User will select printer type, materials, and settings below
Custom Print Settings
Which printer should you use?

Standard FDM (Fused Deposition Modeling) - For General 3D Printing

Our Printers (Print Volume):

Prusa i3 MK3S+ (250mm x 210mm x 210mm)

Creality Ender 5-Plus w/ 0.8mm nozzle* (350mm x 350mm x 400mm)

Voron 2.4 w/ 0.4mm nozzle* (350mm*350mm*310mm)

*Requires L3HSDC Approval

Materials: PLA, PETG, others if provided (contact L3HSDC staff)

For more information on FDM 3D Printing: Ctrl+Click Here

SLA (Stereolithography)

Our Printer (Print Volume):

Elegoo Saturn 2 (8K resolution) (219mm x 123mm x 250mm)

Formlabs Form 3L* (335mm x 200mm x 200mm) *Requires L3HSDC Approval

Materials:

Elegoo Resin Grey

Other Color Resins are available but may need to be purchased. (contact L3HSDC staff)

Formlabs General Clear Resin

Formlabs Engineering Durable Resin

Formlabs Tough 2000 Resin

Other Formlabs Resins are available but may need to be purchased for use. Consult Formlabs Material Selector and contact L3HSDC staff for help selecting the right material.

For more information on SLA 3D Printing: Ctrl+Click Here

CFR (Continuous Fiber Reinforcement) - Requires L3HSDC Approval

Our Printer (Print Volume):

Markforged Mark II (320mm x 132mm x 154 mm)

Materials: Onyx
Select 3D Printer:*
Which material should you use?

Standard FDM Printers

PLA: Standard plastic used for general prints

PETG: Slightly more durable & less stiff plastic, recommended for outdoor/structural parts

ASA: Weatherproof plastic, susceptible to warping (not recommended for general prints)

TPU: Flexible plastic (not recommended for general prints)

Resin Printers

Elegoo Grey Resin: Regular resin, good for high-resolution prototyping and custom figures

Form 3L - Requires L3HSDC Approval

General Clear Resin: Regular resin, good for prototyping

Engineering Durable Resin: Semi-flexible resin for parts requiring durability

Tough 2000 Resin: Strong resin for parts requiring high stiffness

Markforged Mark II - Requires L3HSDC Approval

Onyx: Micro Carbon-fiber Filled Nylon
Select Print Material: Standard FDM*

PLAPETGOther (L3HSDC staff will contact you for details)
Select Print Material: Resin*

8K Resin GreyEngineering Durable Resin (Only for Formlabs Printer Resin)Tough 2000 Resin (Only for Formlabs Printer Resin)Specific Resin Needed (L3HSDC staff will contact you for details)
Select Print Material: Markforged Mark II*

Onyx
Colors Available: PLA *
*NOTICE: color preference not guaranteed unless filament is provided*
Colors Available: PETG *
*NOTICE: color preference not guaranteed unless filament is provided*
Quantity*
*NOTICE: Prints requiring expensive/excessive material may incur a cost to print*
Specify Print Settings, if any
Please add any information about type of infill, supports, or special requirements for your print
*NOTE*: PLEASE ensure your .stl file is exported correctly with proper dimensions

Circular features may not print correctly (they will show as low-poly), so please check your files before uploading. L3HSDC staff may deny a print request or reach out after submission if a print cannot be completed as submitted.
I have checked my .stl file before submitting to ensure the resolution and proper dimensions

Yes
Upload .stl Files for Printing (use mm)*

Upload Files
1 File Submission Only Cancelof
Additional Information or Comments
"I understand that I am expected to check the tracking form in order to know when my print is ready for pickup, and that an email will be sent out when my print is complete. I understand that my print will be discarded if not picked up within 2 weeks after the part complete email is sent."

Tracking form can be found here as well as the "L3Harris Student Design Center" page of the Florida Tech website.

(Check spam folder for the "part completed" email as well.)
Please read the updated terms above
Signature:*
agrees to the statement above
Should be Empty:

L3HSDC 3D Print Form

Custom Print Settings

*NOTE*: PLEASE ensure your .stl file is exported correctly with proper dimensions

NOTE: PLEASE ensure your .stl file is exported correctly with proper dimensions